3
SYSTEM OPERATION
To Review Live Data
3-48 TP04300 Series Interface & Applications Manual
To Review Live Data
Procedure 1. Begin controlling to temperature(s):
• run to a setpoint from either the Operator or Cycle Screen.
2. Press HISTORY tab to review Live data
3. Press "Update From Live Data"
4. Press "Autoscale Time"
5. Press "Autoscale Temperature"
• use Sliders, and Slider Fine Move, to adjust History Graph display
ATTENTION
"Live" data is unsaved data: when live data memory space full, earliest data is progressively
overwritten; if a new Test Setup is run, it progressively overwrites the prior session data (first
in data, is first out of the memory).
To Next Page
Loading...