3
SYSTEM OPERATION
Manipulator Locks
3-4 TP04300 Series Interface & Applications Manual
Manipulator Locks
Locks Detailed
43-arm-locks.jpg
Lock#1:
Vertical Stand
Lock
43-arm-lock#1.jpg
Tighten lock to a) clamp horizontal sweep movement of the manipulator upper arm, and b) to
disable the STAND UP ↑ and STAND DOWN ↓ buttons. When loosened, the manipulator
can be rotated up to 180 degrees in either horizontal direction, limited only by the play in the
attached flexline hose.
Lock #1:
Vertical Stand
Lock
Lock #2:
Lower Arm
Pivot Lock
Lock #3:
Head
Tilt/Swing
Lock
Lock #4:
Head Pivot Lock
(obscured from
view)
Flexline Hose
Vertical Stand
Lock #1:
Vertical Stand
Lock
To Next Page
Loading...