. . . . .
REMOTE INTERFACES
Remote Interfaces Overview
TP04300 Series Interface & Applications Manual 4-3
Software Version 1
compatibility mode
• Only one command or query allowed per command line.
• No command terminators are required. The TP04300A will check the input buffer
every 50mSec for data then process what is in the input buffer. This may lead to the
TP04300A processing incomplete commands in RS-232 mode.
• Allow a 100 mSec delay between commands.
• The following commands return different values for Version 1: AUXC?, "CYCL?"and
"EROR?".
• Remote Command Set (page 4-13) will note the differences in commands between
Version 3 and 1 compatibility.
To Next Page
Loading...