1
SAFETY
Warnings
1-4 TP04300 Series Interface & Applications Manual
WARNING 14: To prevent high-pressure ejection of condensate (which may or may not
contain injurious substances) when draining moisture from the air filter elements, first turn off
the System's air pressure supply, second bleed all air from the System by turning on ac power
to the System just long enough to exhaust air in the System, third disconnect the supply line
from the air supply port fitting located on the rear panel.
WARNING 15: When cleaning condenser air inlet fins, (access fins by removing front panel)
use soft brush and/or vacuum cleaner, taking care not to bend inlet fins; as fins have sharp
edges, to prevent getting cut, wear protective gloves and/or do not touch inlet fins directly with
fingers.
WARNING 16: Only use the coolants (heat transfer fluids) and refrigerants specified by the
manufacturer: they are carefully engineered to be safe for operating personnel, to be friendly to
the environment, to operate efficiently, and to not harm the equipment. Do not substitute
unauthorized coolants and refrigerants, nor mix (add) in unauthorized coolants or refrigerants:
doing so can cause warranties to be voided. Wear protective safety eye glasses, gloves, and
apron when filling coolants and refrigerants. Temptronic assumes no liability for damages
caused by use of unauthorized coolants and refrigerants.
To Next Page
Loading...
Need help?
General
