Material Safety Data Sheet
TITLE: MSDS, HFC REFRIGERANT BLEND TEMPTRONIC CORPORATION an inTEST COMPANY
Sharon, MA 02067
SHT 6 of 10 File: 17037BA A17037 Rev. A
6
-----------------------------------------------------------------------------------------------------------------------------
Section 8 - Exposure Controls / Personal Protection
-----------------------------------------------------------------------------------------------------------------------------
Engineering Controls:
Normal ventilation for standard manufacturing procedures is generally adequate. Local exhaust should be used when
large amounts are released (similar to welding and brazing facilities). Mechanical ventilation should be used in low
places.
Exposure Controls / Personal Protection Continued
Personal Protective Equipment:
Wear impervious clothing, such as gloves, apron, boots, or whole bodysuit as appropriate.
Wear Chemical splash goggles or safety glasses.
Wear NIOSH approved respiratory protection, as appropriate.
Exposure Guidelines:
Exposure Limits
TLV (ACGIH) PEL (OSHA) WEEL
(Workplace environmental exposure level)
HFC-236fa
None Established None Established 1000 ppm TWA (8 hr)
HFC - 23
None Established None Established
Halocarbon –14
None Established None Established
-----------------------------------------------------------------------------------------------------------------------------
Section 9 – Physical and Chemical Properties
-----------------------------------------------------------------------------------------------------------------------------
Physical Data:
HFC-236fa
Specific Gravity 1.370 gm/cc
Vapor Pressure 272.4 kPa @ 25°C (77°C)
Melting Point -98°C (-144°F)
Freezing Point -103°C (153°F)
Boiling Point -1.4°C (29.5°F) @760 mm HG
Form Liquefied Gas
Color Colorless
To Next Page
Loading...
Need help?
General
