6. ACCIDENTAL RELEASE MEASURES
6.1 Personal protection: See 8.2
6.2 Environmental precautions: No special environmental precautions required.
6.3 Clean-up: Sweep, shovel or vacuum spilled product into appropriate containers (do not use a vacuum if material
has contacted a hydrocarbon material). Pick-up and arrange disposal without creating dust. Never use
spilled product.
Spilled product should be disposed of in accordance with all applicable government regulations.
7. HANDLING AND STORAGE
7.1 Handling: Handle and open container with care. Avoid formation of dust particles. Avoid contact with skin and
eyes. Provide an electrical ground connection during loading and transfer operations to avoid static
discharge in an explosive atmosphere and to prevent persons handling the product from receiving static
shocks. A copy of UOP's booklet, "Precautions and Safe Practices for Handling Molecular Sieves in
Process Units", M-100C, can be obtained from your UOP representative at no cost.
7.2 Storage: Store in original container. Keep in a dry place.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Engineering measures: Ensure adequate ventilation, especially in confined areas.
8.2 Personal protection equipment: Handle in accordance with good industrial hygiene and safety practice.
Eye protection: Safety glasses or goggles.
Hand protection: Protective gloves.
Skin and body protection: Work uniform and gloves to prevent prolonged contact.
Respiratory protection: In case of insufficient ventilation wear suitable respiratory equipment with
filter classification: N-95 or if oil/liquid aerosols are present P-95 (42 CFR
84).
_________________________________________________________________________________________________
Molsiv Adsorbents 4A-50 1/16 Revision Number: 1
F89464 January 2001
Page 4 of 10
To Next Page
Loading...
Need help?
General
