Provides a moisture-free environment to -80ºC in a
24/7 test setting with the ThermoStreamthermal source.
Improves load board performance and reliability,
maximizing your investment.
Prevents condensation at the test site, which can lead to
erroneous test results.
For true and accurate testing, ThermoFixture isolates the DUT
from surrounding devices which, if brought to temperature,
could impair accurate test results.
Impedance-matched connections ensure high quality
results when testing
digital, high speed (>40 GHz)
and low noise DUTs
.
Design protects the DUT from any interference from
external noise and other environmental factors for
optimal test accuracy.
Provides greater design efficiency. Utilizing Temptronic’s tester interface and frost-free enclosure technologies, the
ThermoFixture is designed and constructed with turnkey compatibility assured.
Large customer base includes leaders in the military, aerospace, semiconductor and electronics industries worldwide.
Developed in cooperation with the major ATE manufacturers. Temptronic’s expertise in tester interface design is
unique in the industry.
Recognized by its customers with
awards for exceptional quality.
Test individual components on a printed circuit board or tester using a
thermal wand, transforming the X-Stream into a ThermoSpot.
®
Provides the operator with the flexibility to isolate individual components
using the thermal wand with a rubber shroud attached, surrounding the
DUT for testing over the -80º to +225ºC temperature range.
ThermoWand
™
Precise DUT Thermal Control
Greater Thermal Test Accuracy and Reliability
To Next Page
Loading...