Operating the Calculator 184
Changing Mode Settings
Changing Mode SettingsChanging Mode Settings
Changing Mode Settings
From the MODE dialog box:
1. Highlight the mode setting you want to change. Use D or C (with ƒ, „, or …) to
scroll through the list.
2. Press B or A to display a menu that lists the valid settings. The current setting is
highlighted.
3. Select the applicable setting. Either:
• Use D or C to highlight the setting and press ¸.
– or –
• Press the number or letter for that setting.
Note: To cancel a menu and return to the MODE dialog box without making a
selection, press N.
4. Change other mode settings, if necessary.
5. When you finish all your changes, press ¸ to save the changes and exit the
dialog box.
Important: If you press N instead of ¸ to exit the MODE dialog box, any mode
changes you made will be canceled.
To Next Page
Loading...
Need help?
General
