Texas Instruments Voyage 200 User Manual

Appendix A: Functions and Instructions 835
LineTan CATALOG
LineTan expression1 , expression2
Displays the Graph screen and draws a line
tangent to
expression1 at the point specified.
expression1 is an expression or the name of a
function, where
x is assumed to be the
independent variable, and
expression2 is the x
value of the point that is tangent.
Note: In the example shown,
expression1 is
graphed separately.
LineTan does not graph
expression1.
In function graphing mode and a
ZoomTrig window:
Graph cos(x)
¥ "
LineTan cos(x),p/4
¸
LineVert CATALOG
LineVert x [, drawMode ]
Displays the Graph screen and draws, erases, or
inverts a vertical line at window position
x .
If
drawMode = 1, draws the line (default).
If
drawMode = 0, turns off the line.
If
drawMode = ë 1, turns a line that is on to off or
off to on (inverts pixels along the line).
Note: Regraphing erases all drawn items. See
also
PxlVert.
In a
ZoomStd window:
LineVert ë 2.5 ¸
LinReg MATH/Statistics/Regressions menu
LinReg list1 , list2 [, [ list3 ] [, list4 , list5 ]]
Calculates the linear regression and updates all
the system statistics variables.
All the lists must have equal dimensions except
for
list5 .
list1 represents xlist.
list2 represents ylist.
list3 represents frequency.
list4 represents category codes.
list5 represents category include list.
In function graphing mode:
{0,1,2,3,4,5,6}! L1 ¸
{0 1 2 ...}
{0,2,3,4,3,4,6}! L2 ¸
{0 2 3 ...}
LinReg L1,L2 ¸ Done
ShowStat
¸
Note:
list1 through list4 must be a variable name
or c1–c99 (columns in the last data variable
shown in the Data/Matrix Editor).
list5 does not
have to be a variable name and cannot be c1–
c99.
¸
Regeq(x)"y1(x) ¸ Done
NewPlot 1,1,L1,L2
¸ Done
¥%

Texas Instruments Voyage 200 Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Blue
Display resolution	128 x 240 pixels