Connectivity 730
To transfer the Operating System (OS) from unit to unit:
1. Link two like units together, for example, a TI-89 Titanium to a TI-89 Titanium; or a
Voyage™ 200 to a Voyage™ 200.
2. On the receiving and the sending unit, press 2° to display the
VAR-LINK
screen.
3. On the receiving and the sending unit, press …
Link to display the menu options.
4. On the receiving unit, select
5:Receive OS.
A warning message displays. Press N to halt the process, or press ¸ to
proceed. Pressing ¸, displays
VAR-LINK: WAITING TO RECEIVE and BUSY in the
status line of the receiving unit.
5. On the sending unit, select
4:Send OS.
A warning message displays. Press N to halt the process, or press ¸ to start
the transmission.
Important:
• For each receiving unit, remember to back up information as necessary and install
new batteries.
• Be sure both the sending and receiving units are in the
VAR-LINK screen.
During the transfer, the receiving unit shows how the transfer is progressing. When the
transfer is complete:
• The sending unit returns to the
VAR-LINK screen.
• The receiving unit returns to either the Apps desktop or the Home screen. You may
need to use 8| (lighten) or 8« (darken) to adjust the contrast.
To Next Page
Loading...
Need help?
General
