Texas Instruments Voyage 200 User Manual

Basic Function Graphing 306
Note: ƒ 8 does not erase any stat plots.
You don’t have to clear a function to prevent it from being graphed. You can select the
functions you want to graph.
Shortcuts to Move the Cursor
Shortcuts to Move the CursorShortcuts to Move the Cursor
Shortcuts to Move the Cursor
From the Y= Editor:
From the Home Screen or a Program
From the Home Screen or a ProgramFrom the Home Screen or a Program
From the Home Screen or a Program
You can also define and evaluate a function from the Home screen or a program.
•Use the
Define and Graph commands. Refer to:
A function from the entry line
Press
M once or twice (depending on
the cursor’s location) and then press
¸.
All functions
Press ƒ and then select 8:Clear
Functions. When prompted for
confirmation, press ¸.
Press: To:
8C or
8D
Go to function 1 or to the last defined function,
respectively. If the cursor is on or past the last
defined function, 8D goes to function 99.
To erase: Do this:

Texas Instruments Voyage 200 Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Blue
Display resolution	128 x 240 pixels