Texas Instruments Voyage 200 - Page 308

Basic Function Graphing 308
You don’t have to select a function when you enter or edit it; it is selected automatically.
To turn off any stat plots, press ‡
5 or use † to deselect them.
From the Home Screen or a Program
From the Home Screen or a ProgramFrom the Home Screen or a Program
From the Home Screen or a Program
You can also select or deselect functions from the Home screen or a program.
•Use the
FnOn and FnOff commands (available from the Home screen’s † Other
toolbar menu) for functions. Refer to the Technical Reference module.
•Use the
PlotsOn and PlotsOff commands for stat plots. Refer to the Technical
Reference module.
To select or deselect: Do this:
A specified function
• Move the cursor to highlight the function.
• Press
†.
This procedure selects a deselected
function or deselects a selected function.
All functions
• Press ‡ to display the All toolbar menu.
• Select the applicable item.