Topcon X14 - Page 16

xii
9.7.1. Customizing the dashboard 62
9.8. Storing information about jobs 64
9.9. Recognizing color and working status 64
9.10. Understanding default file names 65
Chapter 10 – Steering Calibrations 67
10.1. Calibrating the compass 67
10.2. Calibrating the wheel angle sensor 68
10.3. Calibrating the mounting bias 70
10.4. Dealing with calibration errors/alarms 74
Chapter 11 – Field Menu 77
11.1. Creating a client / farm / field 77
11.2. Selecting a client / farm / field 77
11.3. Setting a new boundary 78
11.3.1. Creating a boundary from coverage 79
11.3.2. Creating a boundary from a shapefile 80
11.3.3. Editing a boundary 82
11.3.4. Removing a boundary 82
11.4. Setting flag points 83
11.4.1. Removing or changing a flag point 83
11.5. Unloading a field 84
Chapter 12 – Job Menu 85
12.1. Creating a new job 85
12.1.1. Setting up job regions 85
12.2. Selecting an existing job 86
12.3. Recording job details 86
12.4. Exporting a job report 87
12.5. Clearing a job 88
Chapter 13 – Guideline Menu 89
13.1. Using straight lines guidelines 89
13.1.1. Setting AB lines manually 90
13.2. Using identical curve guidelines 91
13.3. Using center pivot guidelines 91
13.4. Using guidelock guidance mode 92
13.5. Selecting an existing guideline 92