Toro GrandStand 74534 - Page 143

HYDRAULIC DRIVE SYSTEM
6-10 36” & 40” Toro GrandStand Service Manual
6
16. Remove the low pressure suction line from the pump
tting(Fig.455).
18. Removethetwosetsofbolts,washersandnuts
securing the pump to the engine base (Fig. 457).
Fig. 455 DSCN-2992a Fig. 457 DSCN-3045a
19. Remove the pump.
20. Loosenthejamnutsecuringthereturnhosetting,
thenremovethetting(Fig.458).
Fig. 458 DSCN-3029a
17. Move the hose clamp securing the low pressure
returnhosetothepumptting,thenremovethe
hose (Fig. 456).
Fig. 456 DSCN-2995a