Toro GrandStand 74534 - Page 142

HYDRAULIC DRIVE SYSTEM
6-936” & 40” Toro GrandStand Service Manual
6
12. Mark the high pressure hoses and wheel motor
ttingstoensuretheyarere-installedcorrectly(Fig.
451).
14. Place a drain pan under the wheel motor and dis-
connect both hydraulic hoses from the wheel motor
ttings(Fig.453).
Fig. 451 DSCN-2986a
13. Mark the high pressure hoses and pump to ensure
they are re-installed correctly (Fig. 452).
Fig. 452 DSCN-2980a
Fig. 453 DSCN-2989a
15. Remove the two high pressure hoses from the pump
(Fig. 454).
Fig. 454 DSCN-2990a