Toro GrandStand 74534 - Page 21

CHASSIS
3-2 36” & 40” Toro GrandStand Service Manual
3
8. Using a blunt punch, remove the upper and lower
bearing cups from the caster wheel pivot tube (Fig.
007).
Fig. 005 DSCN-3930a
7. The lower tapered roller bearing is now free to be
removed (Fig. 006).
Fig. 006 DSCN-3933a
Fig. 007 DSCN-3936a
9. Remove the nut securing the caster wheel axle bolt,
then remove the axle bolt (Fig. 008).
Fig. 008 DSCN-0376a
6. Remove the grease seal from the bottom of the
caster wheel pivot tube (Fig. 005).