CHASSIS
3-336” & 40” Toro GrandStand Service Manual
3
10. The caster wheel assembly is now free to be re-
moved from the caster fork.
11. Remove the seal guard from both sides of the wheel
hub (Fig. 009).
Note: The spacer nuts are both threaded onto the
caster axle. One of the spacer nuts will need
to be removed after it has been removed from
the caster wheel (Fig. 011).
Fig. 009 DSCN-0377a
12. Remove the spacer nut from the caster axle (Fig.
010).
Fig. 010 DSCN-0379a
Fig. 011 DSCN-0383a
13. Remove the grease seal from both sides of the
caster wheel (Fig. 012).
Fig. 012 DSCN-0387a
To Next Page
Loading...
