Toro GrandStand 74534 - Page 241

ELECTRICAL
8-20 36” & 40” Toro GrandStand Service Manual
8
27. Remove the extension spring from the drive idler
pulley assembly (Fig. 777).
Fig. 777 DSCN-2574a
28. Remove the drive belt from the engine pulley (Fig.
778).
Fig. 778 DSCN-2575a
29. Remove the bolt and nut securing the clutch anchor
to the engine base (Fig. 779).
Fig. 779 DSCN-2578a
30. Remove the four bolts and Belleville washers
securing the engine to the engine base (Fig. 780).
Fig. 780 DSCN-2581a