Toro GrandStand 74534 - Page 240

ELECTRICAL
8-1936” & 40” Toro GrandStand Service Manual
8
22. 40” Deck: Using a spring tool, remove the exten-
sion spring from the deck anchor post (Fig. 773).
Fig. 773 DSCN-2564a
23. 40” Deck: Using a spring tool, remove the RH
spindle extension spring from the RH deck anchor
post (Fig. 774).
Fig. 774 DSCN-2582a
24. Raise the machine so the underside of the chassis
can be accessed.
25. Remove the cable tie securing the clutch wire
harness to the clutch anchor (Fig. 775).
Fig. 775 DSCN-2566a
26. Remove the deck belt from the clutch pulley (Fig.
776).
Fig. 776 DSCN-2569a