ELECTRICAL
8-18 36” & 40” Toro GrandStand Service Manual
8
16. Loosen the screw on the choke cable clamp and
disconnect the choke cable from the engine choke
lever (Fig. 769).
18. Remove the cable clamp securing the throttle and
choke cable to the engine oil drain (Fig. 771).
Fig. 769 DSCN-2551a
17. Loosen the screw on the throttle cable clamp and
disconnect the throttle cable from the engine throttle
lever (Fig. 770).
Fig. 770 DSCN-2556a
Fig. 771 DSCN-2561a
19. Lower the HOC (height of cut) to the lowest HOC.
20. Remove the belt covers.
21. 36” Deck: Using a spring tool, remove the exten-
sion spring from the deck anchor post (Fig. 772).
Fig. 772 DSCN-2562a
To Next Page
Loading...
