Toro GrandStand 74534 - Premaintenance Procedures

CHASSIS
3-736” & 40” Toro GrandStand Service Manual
3
11. Pack the pivot tube tapered roller bearings with high
temperature grease (Fig. 024).
13. Install grease seal into the base of the pivot tube
(Fig. 026).
Fig. 024 DSCN-0407a
12. Install the lower bearing into the pivot tube (Fig.
025).
Fig. 025 DSCN-3933a
Fig. 026 DSCN-3930a
14. Install the upper bearing into the pivot tube (Fig.
027).
Fig. 027 DSCN-3927a