Toro GrandStand 74534 - Brake System Maintenance; Brake Servicing and Parking Brake Check; Brake Adjustment Procedure

CHASSIS
3-22 36” & 40” Toro GrandStand Service Manual
3
7. Removethetwosetsofbolts,washers,andange
nutssecuringtheRHandLHmufermountbrackets
tothemufer(Fig.086).
Fig. 084 DSCN-4000a
Fig. 086 DSCN-4057a
8. Remove the four sets of nuts and lock washers
securingthemuferpipestotheengine(Fig.087).
Fig. 087 DSCN-4061a
5. Remove the four carriage bolts and nuts securing
themuferguardtothecarrierframe(Fig.084).
6. Loosen the cable clamps securing the choke and
throttle cables to the engine throttle plate, then
remove the “Z” bend of the cables from the engine
control arms (Fig. 085).
Fig. 085 DSCN-4002a