CHASSIS
3-2336” & 40” Toro GrandStand Service Manual
3
9. Remove the cable tie securing the choke and throttle
cables to the oil drain (Fig. 088).
12. Lower the machine.
13. Place two boards under the mower deck, then lower
the deck onto the boards (Fig. 090).
Fig. 088 DSCN-2683a
10. Raise the rear of the machine so the underside can
be accessed.
11. Remove the four sets of bolts, washers, and nuts
securing the rear struts to engine base and carrier
frame (Fig. 089).
Fig. 089 DSCN-4215a
Fig. 090 DSCN-3990a
14. Remove the four sets of bolts and nuts securing the
deck lift chains to the mower deck (Fig. 091).
Fig. 091 DSCN-4179a
To Next Page
Loading...
