Toro GrandStand 74534 - Hydraulic System Maintenance; Hydraulic System Servicing and Fluid Check

CHASSIS
3-2736” & 40” Toro GrandStand Service Manual
3
31. Remove the four high pressure hoses from the
pumps.Capthehoseendsandpumpttingsto
prevent debris from entering the system (Fig. 105).
33. Removethecarriageboltsandangenutssecuring
the cable clamp bracket to the engine base (Fig.
107).
30. Thoroughly clean the area around the hydraulic
ttings,thenmarkthepumpsandttingstoensure
they are returned to their original location upon
assembly (Fig. 104).
32. Remove the bolts and nuts securing the control
cable ends to the pump control arms (Fig. 106).
Fig. 104 DSCN-4039a
Fig. 105 DSCN-4054a
Fig. 106 DSCN-4048a
Fig. 107 DSCN-4050a