CHASSIS
3-28 36” & 40” Toro GrandStand Service Manual
3
36. Remove the pump drive belt.
37. Remove the bolt and nut securing the idler arm
assembly to the engine base (Fig. 110).
Fig. 108 DSCN-4067a
35. Remove the extension spring from the pump idler
assembly and anchor bolt (Fig. 109).
Fig. 109 DSCN-4070a
Fig. 110 DSCN-4075a
38. Remove the nut securing the spring anchor post to
the engine base (Fig. 111).
Fig. 111 DSCN-4072a
34. Using two people or a hoist, lift the rear of the carrier
frame and tower assembly. Walk the carrier frame
and tower assembly forward over the engine and
deck assembly (Fig. 108).
To Next Page
Loading...
