CHASSIS
3-3136” & 40” Toro GrandStand Service Manual
3
47. Removethetwosetsofcarriageboltsandange
nuts securing the engine base to the rear of the deck
(Fig. 120).
49. Using the hoist, raise the engine and engine base
from the mower deck.
50. Remove the four sets of bolts and Belleville washers
securing the engine to the engine base. The engine
base is now free to be removed. (Fig. 122).
Fig. 120 DSCN-4098a
48. Removethetwoangenutssecuringthesidesof
the engine base to the deck (Fig. 121).
Note: Do not remove the thread forming screws
from the deck.
Fig. 121 DSCN-4101a
Fig. 122 DSCN-4108a
To Next Page
Loading...
