Toro GrandStand 74534 - Mower Deck Maintenance; Cutting Blade Servicing and Checking

CHASSIS
3-30 36” & 40” Toro GrandStand Service Manual
3
45. Remove the bolt and nut securing the clutch stop to
the engine base (Fig. 118).
Fig. 116 DSCN-4087a
44. Remove the cable tie securing the clutch wires to the
clutch stop (Fig. 117).
Fig. 117 DSCN-4088a
Fig. 118 DSCN-4091a
46. Secure a lift to the engine to support the engine and
engine base (Fig. 119).
Fig. 119 DSCN-4093a
43. Remove the two thread forming screws securing the
solenoid to the engine base (Fig. 116).