Toro GrandStand 74534 - Mower Deck Pitch and Rear Matching; Adjusting Mower Deck Pitch and Rear Matching

CHASSIS
3-3336” & 40” Toro GrandStand Service Manual
3
5. Secure the clutch stop to the engine base using a
boltandangenut(Fig.126).
6. Push the clutch connector up through the engine
base and position the grommet into the engine base
hole (Fig. 128).
Fig. 126 DSCN-4112a
Note: The clutch stop must be nested into the slot
on the clutch (Fig. 127).
Fig. 127 DSCN-4114a
Fig. 128 DSCN-4117a
7. Secure the clutch wires to the clutch stop using a
cable tie (Fig. 129).
Fig. 129 DSCN-4118a