Toro GrandStand 74534 - Deck Leveling and Height of Cut; Leveling the Front of the Mower Deck; Matching the Height of Cut

CHASSIS
3-34 36” & 40” Toro GrandStand Service Manual
3
10. Place the idler assembly, friction washer, then steel
washer onto the pivot bolt (Fig. 132).
Fig. 130 DSCN-4120a
9. Place the large spacer, one friction composite
washer and bushing onto the pivot bolt (Fig. 131).
Fig. 131 DSCN-4124a
Fig. 132 DSCN-4126a
11. Securetheidlerassemblywithaangenut(Fig.
133).
Fig. 133 DSCN-4129a
8. Place the pivot bolt with washer down through the
engine base (Fig. 130).