Toro GrandStand 74534 - Final Storage Preparation

CHASSIS
3-3736” & 40” Toro GrandStand Service Manual
3
20. Secure the solenoid to the engine base using the
two thread forming screws (Fig. 142).
22. Using two people or a hoist, lift the rear of the carrier
frame and tower assembly. Walk the carrier frame
and tower assembly rearward over the engine and
deck assembly (Fig. 144).
Fig. 142 DSCN-4157a
21. Secure the red cable from the starter to the solenoid
post (Fig. 143).
Fig. 143 DSCN-4163a
Fig. 144 DSCN-4067a
23. Position exhaust gaskets on the exhaust manifold
(Fig. 145).
Fig. 145 DSCN-4173a