Toro GrandStand 74534 - Page 64

CHASSIS
3-4536” & 40” Toro GrandStand Service Manual
3
52. Secure the rear struts to the frame and engine base
usingthebolts,largewashers,andangenuts(Fig.
174).
Fig. 174 DSCN-4215a
53. Secure the high pressure hoses to the pump (Fig.
175).
Note: Ensure the hose is installed to the correct
wheelmotorttingbyusingtheidentication
markings. If installed incorrectly, wheel
direction will be reversed.
Fig. 175 DSCN-4222a
54. Loop the hoses around the control cables (Fig. 176).
Fig. 176 DSCN-4224a
55. Install the hoses to the wheel motor (Fig. 177).
Note: Ensure the hose is installed to the correct
wheelmotorttingbyusingtheidentication
markings. If installed incorrectly, wheel
direction will be reversed.
Fig. 177 DSCN-4227a