Toro GrandStand 74534 - Page 65

CHASSIS
3-46 36” & 40” Toro GrandStand Service Manual
3
57. Installthehosestothewheelmotorttings(Fig.
180).
Note: Ensure the hoses are installed to the
correctwheelmotorttingsbyusingthe
identicationmarkings.Ifinstalledincorrectly,
wheel direction will be reversed.
Fig. 178 DSCN-4229a
Note: Ensure the hoses are installed to the correct
pumpttingsbyusingtheidentication
markings. If installed incorrectly, wheel
direction will be reversed. Loop the hoses
around the control cables and opposite side
pump hoses (Fig. 179).
Fig. 179 DSCN-4231a
Fig. 180 DSCN-4236a
58. Position the battery on the battery tray. Using the
bolt nut and washer, secure the positive battery
cable to the battery. Using the bolt nut and washer,
secure the negative battery cable to the battery (Fig.
181).
Fig. 181 DSCN-2698a
56. Install the high pressure hoses to the opposite pump
(Fig. 178).