Toro Reelmaster 3100-D - Page 333

InstallingtheReelAssembly(continued)
C.Restthehandleoftheprybaragainstthefrontrollerandtightenthe
splineinsertclosesttotheprybar.Thesplineinsertsareinstalledwith
threadlockingcompound(Loctite#243orequivalent).Tightenthespline
insertfrom115to128N·m(85to95ft-lb).Usecorrectsplineinserttool
(refertoSpecialTools(page2–13)).
D.Positiontheprybarinthesamemannerontheoppositeendofthereel
andtightentheremainingsplineinsert.
16.Ifcounterweightwasremovedfromcuttingunit,installnewO-ringoncounter
weight.Securecounterweighttocuttingunitsideplatewithtwo(2)ange
nuts.T orquescrewsfrom37to44N·m(27to33ft-lbs).
17.Installthecuttingunittothemachine.
Reelmaster
®
3100-D/3105-D
Page8–25
DPACuttingUnits:ServiceandRepairs
20252SLRevA