Toro Reelmaster 3100-D - Bedbar Assembly Removal and Installation

BedbarAssembly
g343482
Figure169
1.Bedbarassembly
5.Plasticwasher(4each)9.Bedbarpivotbolt(2each)
2.Locknut(2each)6.Rubberbushing(2each)10.Locknut(2each)
3.Compressionspring(2each)7.Flangebushing(2each)
4.Washer(2each)8.Metalwasher(2each)
RemovingtheBedbarAssembly
CAUTION
Contactwiththereel,bedknifeorothercuttingunitpartscanresult
inpersonalinjury.Useheavygloveswhenhandlingthebedbar.
1.Parkthemachineonacleanandlevelsurface,lowerthecuttingunits
completelytotheground,shutofftheengine,settheparkingbrake,and
removethekeyfromthekeyswitch.
2.Removethecuttingunitfromthemachine.Usethecuttingunitkickstandto
supportthecuttingunit(refertoSpecialTools(page2–13)).
3.Loosenthelocknuts(item2inFigure169)ontheendofeachbedbar
adjusterassemblyuntilwasher(item2)isloose.
DPACuttingUnits:ServiceandRepairs
Page8–10
Reelmaster
®
3100-D/3105-D
20252SLRevA