Toro Reelmaster 3100-D - Page 340

InstallingtheFrontRoller(continued)
B.Applyanti-seizelubricanttocapscrewthreadsthatwillextendinto
height-of-cut(roller)bracket.
C.Threadcapscrewintobracket.
Note:Whenassemblingheight-of-cut(roller)bracketstosideplate,make
surethatthecapscrewheadandonewasherareaboveadjustmentange
onsideplateandsecondwasherandangelocknutarebelowange.
3.Ifbothfrontheight-of-cut(roller)bracketswereremovedfromcuttingunitside
plate,positiononeofthebracketstosideplate.Securebrackettosideplate
withcarriagescrewandangelocknut.
4.Slidefrontrollershaftintobracketattachedtothecuttingunit.Slidesecond
height-of-cut(roller)bracketontotheotherendofrollershaft.Securesecond
brackettocuttingunitsideplatewithcarriagescrewandangenut.
5.ApplyLoctite#243(orequivalent)toexposedthreadsofcapscrew(item1)
betweenangeofsideplateandpositionofangelocknut(item3)oncap
screw.Tightenangelocknutoncapscrewandthenloosennut1/4to1/2
turn.Capscrewshouldrotatefreelywithlittle(ifany)endplayafterlock
nutinstallation.
6.ApplyLoctite#243(orequivalent)tothreadsoftwo(2)capscrews(item
6).Centerfrontrollertothecuttingreelandsecureinplacewithtwo(2)
capscrews.T orquecapscrewsfrom20to26N·m(15to19ft-lb).Secure
capscrewswithangenuts.
7.Lubricatethefrontroller.
8.Adjustthecuttingunit;refertoCuttingUnitOperator’sManual.
DPACuttingUnits:ServiceandRepairs
Page8–32
Reelmaster
®
3100-D/3105-D
20252SLRevA