4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.3 PEEL-OFF MODULE (B-EX906-H-QM-R)
4-19
11. Align the screw holes in the Rewinder Ass’y with those in the printer main frame, and secure the
Rewinder Ass’y with the five ST-3x6 screws.
12. Align the screw holes in the Core Shaft Support with those in the printer base frame, and secure the
Core Shaft Support with the five M-4x4 screws.
Rewinder Ass’y
ST-3x6 Screw
ST-3x6 Screw
ST-3x6 Screw
ST-3x6 Screw
M-4x4 Screw
Core Shaft Support
To Next Page
Loading...
