10 Important Information on Making Copies
0.Important Information on Making Copies
Storage of color copies (Color Model only)
When storing color copies, be careful of the following:
Avoid a place exposed to light. The colors may fade when they are stored in such a place for a long time.
If copies are stored pressed between plastic sheets made of chloroethylene for a long time, toner may melt and
stick to the plastic. For long-time storage, use polyethylene binders.
When a color copy is folded, toner at the folded part may flake off. Do not fold color copies when storing them.
Toner on copies may melt if it touches solvent or ink not fully dried. Keep copies away from them.
When copies are left under an extremely high temperature environment such as in the vicinity of a heater, toner
may melt. Store them at room temperature and avoid extreme temperature changes.
Forgery prevention function
This equipment has a forgery prevention function. Therefore, scan or copy function might not operate correctly.
Simple Copy
The equipment provides an independent menu called “Simple Copy” so that you can make copies with minimum
operations.
To learn how to use the menu, refer to the Quick Start Guide of this equipment.
To Next Page
Loading...
Need help?
General
