2.HOW TO MAKE COPIES
48 Enlarging or Reducing Images
Specifying reproduction ratio manually
1
Press [ZOOM] on the BASIC menu.
2
Press the buttons below to select the desired reproduction ratio.
[UP] and [DOWN] buttons
The reproduction ratio changes by 1% every time either of them is pressed. When you hold either down, the ratio
goes up or down automatically.
One-touch zoom buttons
Select the desired ratio from [400%], [200%], [100%], [50%] and [25%].
When the ADF is used, the maximum ratio available is 200%.
3
Select the desired size, and then press [OK].
If you want to select a paper size other than the following, you need to register the size as “OTHER”. Once you
register this size, it will be specified every time you press [OTHER] on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
P.46 “Registering paper sizes to “OTHER” size”
Paper sizes can also be registered by pressing the desired drawer button of the equipment status indication
area on the BASIC menu.
To Next Page
Loading...
Need help?
General
