1.BEFORE MAKING COPIES
Before Using Copier Functions 17
BEFORE MAKING COPIES
Clearing the set functions
If you want to clear any copy function setting, press [RESET] on the corresponding setting menu.
However, for FULL IMAGE on the EDIT menu, also press the highlighted button to clear the setting.
P.70 “Displaying the EDIT Menu”
Clearing all settings changed
When you press the [FUNCTION CLEAR] button on the control panel, all the function changes will be cleared.
Even if you do not do so, the changes will be cleared if the equipment is left idle for 45 sec. (default setting). For how to
change this period, refer to the MFP Management Guide.
Restrictions on function combinations
Several copy functions can be used together. However some functions may not be used with other ones.
To Next Page
Loading...
Need help?
General
