2.HOW TO MAKE COPIES
24 Basic Copying Procedure
Interrupting copying and making other copies (interrupt copying)
You can interrupt the copy job in progress to make other copies (interrupt copying). When restarting the interrupted
job, you do not have to reselect copy modes that have been set because they are memorized in this equipment.
The following functions cannot be used together with interrupt copying:
Cover sheet copying, Sheet insertion copying, Job build, Store to e-Filing, Copy & File
During interrupt copying, the mode cannot be changed to a non-copying one, such as e-Filing, scanning, printing or
fax. To change the mode, first press to clear the interrupt copying.
1
Press .
A message appears indicating that interrupt copying is ready, and “INTERRUPT” is displayed on the function
display.
If the original is being scanned, the message above appears after the scanning has finished.
2
Select other copy modes as required and then press the [START] button on the control panel.
3
Press again after the interrupt copying has finished.
The interrupted job restarts.
To Next Page
Loading...
Need help?
General
