HOW TO MAKE COPIES
Basic Copying Procedure 21
0.Basic Copying Procedure
Make copies following the procedure below.
1
Make sure that paper is placed in the drawer(s).
For the types and sizes of acceptable paper and how to place it, refer to the Paper Preparation Guide.
2
Place the original(s).
For the types and sizes of originals and how to place them, refer to the Paper Preparation Guide.
3
Enter the desired number of copies on the touch panel if you want more than one copy.
4
Select the copy modes as required.
5
Press the [START] button on the control panel.
Copying starts. The paper exits with its copied side down.
RADF Original glass
OR
2
53,4
1
To Next Page
Loading...
Need help?
General
