1.BEFORE MAKING COPIES
12 Basic Menu of the Copier Function
12. [JOB STATUS] button
This is for confirming the processing status of copy, fax, scan or print jobs, and also for viewing their performing
history. Pressing [JOB STATUS] > [JOBS] > [SCAN] displays the scan job statuses in list.
For more instructions on viewing job statuses, refer to the Software Troubleshooting Guide.
13. [STOP] button ( P.23)
This is to stop making copies.
14. Interrupt copying button ( P.24)
This is for interrupting the copy job in progress to make other copies.
15. [PROOF COPY] button ( P.25)
This is for making a proof copy to check an image before making a large amount of copies.
16. Density adjustment buttons ( P.42)
These are for adjusting the density level of images.
17. Color mode buttons ( P.41)
These are for switching color modes.
18. Number of copy sets
This shows the number of copies to be made. To change it, press this area and enter the desired number.
19. Number of remaining copy sets
20. [?](Help) button
This is for viewing the explanation of each function or the buttons on the touch panel.
21. Language button
This is to switch a language.
22. Adding to Home screen button
This is to add a setting such as a job setting to the Home screen. For more instructions, refer to the Template
Guide.
23. [TEMPLATE] button
This is for the template function. For more details, refer to the Template Guide.
24. [SETTINGS] button ( P.16)
This is for checking currently set functions.
25. [STORAGE] button ( P.122)
This is for the storage function.
To Next Page
Loading...
Need help?
General
