Configuring the EPW 400
106 OM 100.EPW400.202002.en
6.6.8 Field bus parameters
Only for devices with field bus interface!
For changing the Anybus-S parameters, tap on button 'Parameter Any-
bus-S'
6.6.9 Profibus address (only for Profibus version)
The arrows and can be used to decrease or increase the Profibus address
by a value of 1 each time.
When tapping on the input field between the arrows, you can change the number
of the Profibus address with the help of the numerical keypad.
Note:
After changing the Profibus address, a new start of the device is re-
quired!
To Next Page
Loading...
General