Configuring the EPW 400
66 OM 100.EPW400.202002.en
6.1.1 Select process number (64 processes)
− The process number can be selected using the arrows and .
− The process number can be accessed by numerical input:
Tap the Process No. input field.
A window containing a numerical keypad will open.
Enter the required process number and confirm this value with the 'Enter' button.
6.1.2 Assign process name (max. 40 characters)
You can assign a name to each process. Tap on Process Name, and a window will
open with an alphanumeric keypad for entering the name:
By pressing the shift key you can switch to
− capital letters
− lowercase letters
− numbers and special characters
The entry is adopted using the 'Enter' button.
You can also enter a number containing up to ten digits for each process (T num-
ber). Tap on the number and a window will open with a numerical keypad, which
can be used to enter the number.
To Next Page
Loading...
General