Software module TOX®softWare
114 OM 100.EPW400.202002.en
8 Software module TOX
®
softWare
• Display and filing of measuring values
• Processing and filing of device configurations
• Offline - setup of device configurations
Please observe the comprehensive separate operating manuals for TOX
®
softWare
WORX and the EPW 400 software module.
8.1 Networking via Ethernet
Transfer of measuring data to the PC – Ethernet
The PC used for data acquisition can communicate with several EPW 400 devices via
the Ethernet interface. The IP address of the individual devices can be set via a menu.
The central PC cyclically monitors the status of all EPW 400 devices. On termination
of a measurement, the result will be read and logged by the PC.
8.2 Network server program EPW 400_Server
The network program EPW 400_Server establishes a connection between the
TOX
®
softWare Worx and the EPW 400.
A connection can only be established between the TOX
®
softWare Worx and the EPW
400 when the EPW 400_Server has been started.
To Next Page
Loading...
General