turck TBEN-L Series - Parameters for I;O Channels

PROFINET
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
108
12.5.2 Parameters for I/O Channels
Parameter name Value Meaning
Digital input
Invert digital input (Inv. DIx)
0 = no
1 = yes The input signal is inverted.
Manual output reset after
overcurrent (SROx)
0 = no
The output switches on automatically after an over-
load.
1 = yes The output is manually switched-off and on again.
Activate output (EN DOx) 0 = no
1 = yes
Pulse stretching input (*10 ms) The input signal is stretched.
The time can be set from 0 to 2550 ms in steps of 10 ms.
Default setting:
0 = pulse stretching deactivated
(standard signal = 2,5 ms)
Example:
10 = signal of 100 ms