69
2017/06
QuickConnect via Web Server
QuickConnect can also be activated or deactivated using the device's web server, see also chapter
13.12, Station Configuration, page 122.
11.5 Device Level Ring (DLR)
The Device Level Ring (DLR)-redundancy protocol is used to increase the stability of EtherNet/IP™
networks.
DLR-capable products provide an integrated switch and can thus be integrated into a ring topology.
The DLR-protocol is used to recognize a ring fault. In case of an interruption of the data line, data are
sent through an alternative network section, so that the network can be reconfigured as soon as
possible.
DLR-capable network nodes are provided with extended diagnostic functions which enable the
devices to localize errors and thus decrease the time for error search and maintenance.