turck TBEN-L Series User Manual

39
2017/06
8.4.3 Parameters for I/O Channels
Further information about the parameters can be found in the fieldbus specific chapters.
 EtherNet/IP™: Digital Versatile Module Class (VSC117), page 95 ff.
 Modbus TCP: Register Mapping of the TBEN-L Devices, page 57 ff.
 PROFINET: Parameters, page 107
8.4.4 Diagnostic Messages
Further information about the diagnostic data mapping can be found in the fieldbus specific chap-
ters.
 Modbus TCP: Register Mapping of the TBEN-L Devices, page 57 ff.
 EtherNet/IP™: Digital Versatile Module Class (VSC117), page 95 ff.
 PROFINET: PROFINET-diagnostics, page 103
Parameter name Value Description
Manual output reset
after overcurrent
(SROx)
0 = no The output switches on automatically after
an overload.
1 = yes The output is manually switched-off after
an overload until a new set-command is
given (rise and fall).
Diagnostics Description
SCSx Short-circuit at the supply voltage for the respective connector.
SCOx Overcurrent at the respective output

turck TBEN-L Series Specifications

General

Brand	turck
Model	TBEN-L Series
Category	I/O Systems
Language	English