The Web Server
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
120
13.11 Network Configuration
On the "Network Configuration"-page, network-relevant settings can be changed.
13.11.1 Change Network Parameters (Port Settings, IP Address, etc.)
The device's network settings can be changed under "Network Configuration" only by users having
administrator rights.
Fig. 28: Web server "Network Configuration"
NOTE
The access of the web server to the station is only possible, if the station already has an IP
address, Address Assignment, page 18.
The address setting via the web server is only possible if the device is operated in switch
position 500 = PGM or 600 = PGM-DHCP-mode.