125
2017/06
14 Access via Turck DTMs in PACTware™
14.1 General
The access to the TBEN-L modules using the Turck DTMs is done via Ethernet.
14.1.1 Address Setting via DTM
In a respective frame application e.g. PACTware™, the Turck DTMs allow direct access to Ethernet.
The IP address, as well as the subnet mask of the Ethernet devices, can be changed according to the
application by using the Busaddress Management function of the BL Service Ethernet interface
(TCP/IP) in the DTM.
Fig. 32: BL Service Ethernet